How to measure your filter cartridge.

A. Measure the outside diameter of the cartridge in inches. (+/- 1/16)

B. Measure the overall length of the cartridge in inches (+/- 1/16), including the end caps. Do not include any handles, strings, etc. A more accurate measurement is made by measuring through the center of the cartridge when possible.

C. If the top and/or bottom is open, measure the inside diameter of the opening (+/- 1/16 in.). Match the cartridge end cap configuration to a corresponding one in the complete end cap gallery.

D. Make note of the manufacturer (OEM) and model number of the filter the replacement cartridge will be installed in.

E. Take note whether or not there is a center core (PVC pipe in center). Also count the number of pleats (+/- 2).

To purchase your pool filter cartridge or other items for your pool filter please visit Pool Cartridge Deals.

HOW TO CLEAN YOUR CARTRIDGE FILTER

Cleaning your swimming pool cartridge fitler is really quite an easy task. The filter should be cleaned anytime the pressure on the filter guage reads 8 - 10 pounds higher than normal running pressure. To clean your filter simply follow these easy steps:

1. Turn off your pool equipment (it is best to turn off the master switch so the timer does not automatically turn on the equipment while the filter is taken apart)
2. Release the pressure from your pool filter tank by opening the release valve which is ususlly located near the pressure guage.
3. Unscrew the band around the middle or top of the tank to remove the tank top
4. Remove the cartridges from inside the filter (cartridge pool filters hold 1 - 4 cartridges so REFER TO YOUR OWNERS MANUAL FOR INSTRUCTIONS ON REMOVING THE CARTRIDGE/S)
5. Using a cleaning device such as a water wand attached to your garden hose gently wash off the losoe debris and sand from the unit. Spray from the top of the cartridge down. To remove tougher debris spray with a cartridge spray cleaner or soak (follow directions on bottle of cleaner). Re-rinse the unit. DO NOT use a high power sprayer such as a power washer or car wash sprayer as this can damage the filter media and reduce the life of the cartridge.
6. Once the cartridge is clean it may be returned to the pool filter. Be sure you have removed all cleaner residue. **If using muriatic acid to remove tough stains only use 1 part Muriatic Acid to 20 parts water, add acid to water and HANDLE WITH CARE**
7. If you have a back up set of cartridges you may place them in the filter and allow your newly cleaned ones to dry out. After they are dry brush off with a soft brush and store for future use.

For other articles on pool care or to purchase items for your pool please visit www.poolcartridgedeals.com

Happy Spring and Happy Swimming :)